MAINTENANCE MANUAL > Disassembly and Reassembly > Pressurizing relations > Pressure pump assy.
Model
SWJ-320S
Issued 2012.07.19 Revised
6.6.3 Pressure pump assy.
Backside of machine
Work procedures
Pressure pump assy.
Connector
The exhaust side
© 2013 MIMAKI ENGINEERING CO.,LTD.
1. Turn off the main power supply and remove the power plug
from the main body.
2. Open the cover LR.
screw(x2)
3. Disconnect the connection connectors.
4. Unscrew the screws on the side surface of bracket, and remove
the pressure pump assy..
5. Disconnect the air tube from the pressure pump assy..
6. Reverse the disassembly procedure for reassembly.
キ
Pressure pump assy.
F/W ver
Remark
Pressure pump assy.
For the pressure pump, two ports are equipped
for the intake and exhaust.
At assembling, connect the tube to the exhaust
side, referring the left figure.
Rev.
1.0
1
2
3
4
5
6
7
8
6.6.3
R.1.0
P.1