MIMAKI SWJ-320 S2 Maintenance Manual page 85

MAINTENANCE MANUAL > Adjustment > Adjustment Items > FEED COMP.2
Model SWJ-320S Issued 2012.07.19 Revised
4.2.18 FEED COMP.2
Pattern0
= 0
-250∼250
OK
NG
Increase adjustment value to "+" direction
due to insufficient adjustment value.
More distant than 40μm
NG
Due to a lot of adjustment values, reduce
adjustment values.
More distant than 40μm
Pattern1
= 0
Pattern15
= 0
© 2013 MIMAKI ENGINEERING CO.,LTD.
F/W ver 1.0 Remark
5. Check the adjustment pattern.
Compensation value: -250 ~ 250 (Unit: 2
[] / [] : Changes adjustment values.
[ENTER] : Registration/To next pattern
If the value of pattern 0 exceeds ±30, check if the
front and back of media does not touch to the
floor, and print the adjusting pattern again.
If the pattern is within ±40 µm, the adjustment is not
required.
6. In the same way, check/adjust other patterns.
Rev.
1.0
μ
m)
1
2
3
4
5
6
7
8
4.2.18 R.1.0 P.2