MAINTENANCE MANUAL > Adjustment > Adjustment Items > [HEAD ADJUST] Head tilting
Model SWJ-320S Issued 2012.07.19 Revised
4.2.3 [HEAD ADJUST] Head tilting
Head condi-
Figure when viewed
tion
with a scope
Not tilted
Tilted to
the right
Tilted to
the left
© 2013 MIMAKI ENGINEERING CO.,LTD.
F/W ver 2.20 Remark
8. Turn the tilt adjustment screw and adjust the tilt of the head.
Adjustment method
(tilt adjustment
screw rotation
direction)
Back side
Near side
Back side
Near side
9. Tighten the head fixing screw.
10. Put on the cap.
11. Print and verify the adjustment pattern.
In case of the head being out of the acceptable range, repeat the
above procedure 6 to 9 until the tilting is within the acceptable
range.
If the cap is kept off for a long time, it may result
in a skewed ink discharge trajectory or nozzle
misalignment. If skewed ink discharge trajectory
or nozzle misalignment occurs, the head cannot be
adjusted properly, so do not keep the cap off for a
long time.
In addition, if nozzle misalignment or skewed ink
discharge trajectory occurs, perform cleaning.
Rev.
1.0
1
2
3
4
5
6
7
8
4.2.3
R.1.0
P.2