MIMAKI SWJ-320 S2 Maintenance Manual page 140

MAINTENANCE MANUAL > Disassembly and Reassembly > Drive System > Linear Encoder Scale
Model SWJ-320S Issued 2012.07.19 Revised
6.3.3 Linear Encoder Scale
Linear Encoder Scale
 Work procedures
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode func-
tions mistakenly during the operation.
While at work, be sure not to attach fingerprints or oil to the linear encoder scale. Also, pay atten-
tion not to break or scratch it. (If contaminated, clean the scale with a neutral detergent.)
Screw
Scale holder
Double sided tape
© 2013 MIMAKI ENGINEERING CO.,LTD.
1. Open the following covers.
Scale cover (x3)
2. Remove the scale cover (x3).
3. Peel off a double sided tape of the scale holder.
F/W ver Remark
• Left mentenance cover
• Front cover
• Right mentenance cover
If the inside of machine is dark, it is recommended to
turn on the drawing surface light switch.
Rev.
1.0
1
2
3
4
5
6
7
8
6.3.3 R.1.0 P.1