MIMAKI SWJ-320 S2 Maintenance Manual page 164

MAINTENANCE MANUAL > Disassembly and Reassembly > Pressurizing relations > Plural solenoid valve assy.
Model SWJ-320S Issued 2012.07.19 Revised
6.6.2 Plural solenoid valve assy.
Backside of machine
 Work procedures
4 3 2
Air tank sensor assy.
4 3
© 2013 MIMAKI ENGINEERING CO.,LTD.
1. Turn off the main power supply and remove the power plug
from the main body.
Bracket
2. Open the cover LR.
3. Remove the screw, and remove the BKT.
screw(x2)
1
4. Disconnect the connection connectors.
Valve 1
2
Connector 1
5. Unscrew the screws on the upper surface of bracket, and
remove the solenoid valve assy.
6. Disconnect the air tubes (2 positions) arranged in the solenoid
valve assy.
screw(x2)
7. Reverse the disassembly procedure for reassembly.
F/W ver Remark
In case of the replacement of plural solenoid valve
assy., make some marking to the connection con-
nectors and the air tubes, and connect them cor-
rectly.
Rev.
1.0
Plural solenoid valve assy.
6.6.2 R.1.0 P.1
1
2
3
4
5
6
7
8