Replacement Of The 180 Lpi Encoder Sensor - MIMAKI SWJ-320 S2 Maintenance Manual

MAINTENANCE MANUAL > Workflow > Electrical Parts > Replacement of the 180 LPI Encoder Sensor
Model SWJ-320S Issued 2012.07.19 Revised

3.3.6 Replacement of the 180 LPI Encoder Sensor

 List of replacement procedures
Item

Covers Power OFF
1.
 Removal of covers, etc.
2.

Encoder Sen- Encoder Sensor replacement
3.
sor
Check/  Encoder position adjustment
4.
Adjustment
 Power ON
5.

Encoder check
6.

Covers Mounting of the covers.
7.
For the power OFF, be sure to turn the main power OFF.
If the sleep function works accidentally during the operation, it is very dangerous.
© 2013 MIMAKI ENGINEERING CO.,LTD.
180 LPI Encoder Sensor
Work operation
Turning the main power OFF.
* Be sure to turn the main power OFF since the power
Remove the following covers.
 Carriage cover
 SD PCB cover
Checking the encoder mounting at the specified position.
Turning the power ON to start the machine.
Carry out the encoder check to confirm it functions nor-
mally.
Mount the covers that have been removed.
F/W ver Remark
Description
comes ON due to the sleep control if turned to OFF by
the power SW on the panel.
Rev.
1.0
1
2
3
Ref.
---
4
6.1.1
6.4.4
5
4.3.6
---
5.1.9
6
6.1.1
7
8
3.3.6 R.1.0 P.1