MIMAKI SWJ-320 S2 Maintenance Manual page 92

MAINTENANCE MANUAL > Adjustment > Adjustment Items > CHARGE INK
Model SWJ-320S Issued 2012.12.14 Revised
4.2.22 CHARGE INK
CHARGE INK
CLEAR [ENT]
SELECT COLOR
:BLACK
SELECT COLOR
:NONE
CLEAR OK?
NO< >YES
** WRITING **
DO NOT REMOVE INK IC
COMPLETED
[ENT]
© 2013 MIMAKI ENGINEERING CO.,LTD.
F/W ver 2.10
2. Select [CLEAR].
3. [] [] By pressing[] / [] key, select a color of which you
clear the charge ink information. When you clear charge ink
information of all colors, select "ALL".
 If the charge ink information registered in the main
body is less than 1cc, it is not displayed for
"SELECT COLOR".
 If charge ink information of all colors are less than
1cc, "NONE" is displayed.
4. If you want to clear charge ink information inside the main
body, select "YES".
5. When you select "YES", charge ink information inside the main
body is cleared and writing to the memory starts.
 Do not turn off the power supply during writing.
6. Press [ENTER].
Remark
4.2.22
Rev.
1.0
1
2
3
4
5
6
7
8
R.1.0 P.3