MAINTENANCE MANUAL > Adjustment > Adjustment Items > HEAD ADJUST
Model SWJ-320S Issued 2012.07.19 Revised 2013.03.08 F/W ver 2.20 Remark
4.2.1 HEAD ADJUST
Head Adjusting Flow with [AVERAGING.ADJ.]
Head adjustment acceptable range (Displacement amount on
averaged adjustment patterns)
Head tilt: Within 0 ± 10um
Stagger/Front and back: Within 0 ± 10um
To Carriage base tilting
adjustment
(4.2.2)
© 2013 MIMAKI ENGINEERING CO.,LTD.
NG: Tilt
Head most
No
slanting to right is within
acceptable range?
Yes
To Head tilting adjustment
(4.2.3)
START
Test Print
Nozzle check
Dot missing or blurred?
OK
Pattern print
(AVERAGING)
Tilting/Stagger
position/Front and back position
of all heads are within
acceptable range
?
NG:Stagger/ Forward/
backward position
To Stagger/Front and back
adjustment (4.2.4)
Rev.
1.1
NG
Head cleaning
OK:All heads
To
PRINT ADJUST (4.2.8)
4.2.1
R.1.1
1
2
3
4
5
6
7
8
P.2