MIMAKI SWJ-320 S2 Maintenance Manual page 177

MAINTENANCE MANUAL > Disassembly and Reassembly > Heater relations > SSR
Model SWJ-320S Issued 2012.07.19 Revised
6.8.2 SSR
After turning off the sub and main power switches, unplug the power cord. Make sure to take 15
minutes before restarting the operation. It is very dangerous if sleep mode functions mistakenly
during the operation.
Additionally, if electric charges are still remaining, it may cause damage to electronic parts or the like.
 Work procedures
Inside of electrical box
PRT-SSR Pr-SSR
screw(x5)
© 2013 MIMAKI ENGINEERING CO.,LTD.
SSR
1. Turn off the main power supply and remove the power plug
from the main body.
2. Open the left electrical BOX cover.
3. Remove the SSR cover (a clear resin cover).
4. Disconnect all of the cables connected on the SSR.
POST-SSR
5. Unscrew the SSR mounting screws, and remove the SSR.
6. Reverse the disassembly procedure for reassembly.
F/W ver Remark
At connecting the cables, connect them correctly.
Rev.
1.0
1
2
3
4
5
6
7
8
6.8.2 R.1.0 P.1