Replacement Of The Ink Supply Pump - MIMAKI SWJ-320 S2 Maintenance Manual

MAINTENANCE MANUAL > Workflow > Ink Related Parts > Replacement of the Ink Supply Pump
Issued 2012.07.19 Revised
Model SWJ-320S

3.1.3 Replacement of the Ink Supply Pump

 List of replacement procedures
Item

Ink discharge 1. Ink discharging of ink route

Power OFF
2.

Ink Supply Pump 3. Ink Supply Pump replacement
Ink charging  Power ON
4.
 Head ink charging
5.
 Test printing
6.
Be sure to wear protective glasses and working gloves during the operation.
Ink may get into your eyes depending on the working condition, or hand skin may get rough if you touch
the ink.
© 2013 MIMAKI ENGINEERING CO.,LTD.
filter
Work operation
Discharging the ink of ink route by executing the [#INK
PURGE] (Feed pump ON), in the condition that the ink tube
is disconnected from the ink bottle.
Turning the main power OFF.
* Be sure to turn the main power OFF since the power
Turning the power ON to start the machine.
Executing the [#INK PURGE] (Feed pump ON) to charge
the ink to the head.
Checking the nozzle condition.
F/W ver. Remark
ink pump
Description
comes ON due to the sleep control if turned to OFF by
the power SW on the panel.
Rev.
1.0
1
2
3
Ref.
4.2.14
4
---
6.2.3
5
---
4.2.14
6
7
8
3.1.3 R.1.0 P.1