Table of Contents
Advertisement
MAINTENANCE MANUAL > Disassembly and Reassembly > Pressurizing relations > Air Tank Sensor assy.
Model
SWJ-320S
Issued 2012.07.19 Revised
6.6.1 Air Tank Sensor assy.
Backside of machine
Work procedures
4
3
2
Air tank sensor assy.
Air tube
© 2013 MIMAKI ENGINEERING CO.,LTD.
1. Turn off the main power supply and remove the power plug
from the main body.
Bracket
2. Open the cover LR.
3. Remove the screw, and remove the BKT.
screw(x2)
1
4. On the back side of bracket, disconnect the connector between
the air tank sensor cable and the junction cable.
5. Disconnect the air tubes (2 positions).
6. Reverse the disassembly procedure for reassembly.
F/W ver
Remark
In case of the replacement of plural air tank sen-
sor assy., make some marking to the connection
connectors and the air tubes, and connect them
correctly.
The connecting destinations of each tank and junc-
tion cable as follows:
Red: Tank 2
Blue: Tank 3
Black: Tank 4
Pressure pump assy.
Rev.
1.0
Air tank sensor assy.
Yellow: Tank 1
Backside of bracket
6.6.1
R.1.0
P.1
1
2
3
4
5
6
7
8
Advertisement
Table of Contents
