MIMAKI SWJ-320 S2 Maintenance Manual page 2

Service Documents > Maintenance Manual Change Tracking
Maintenance Manual Change Tracking
Date 2013.08.28
Status Index
Revised 2.1.1
Revised 2.3.1
Revised 2.3.2
Revised 3.3.1
Added 3.3.2
Revised 3.3.3
Revised 3.3.4
Revised 4.2.23
Added 6.4.2
Revised 6.4.3
Date 2013.03.08
Status Index
Revised 2.1.1
Revised 2.3.1
Added 2.3.3-P.2
Added 2.3.4-P.2
Added 2.3.5-P.2
Added 2.3.6
Added 2.3.7
Revised 3.3.2
Added 4.2.1
Revised 4.2.4
Added 4.2.5
Added 4.2.6
Added 4.2.7
Revised 4.2.13
Revised 4.2.14
Revised 4.2.23
Revised 4.3.3
Revised 4.3.4
Added 4.3.5
Added 5.1.15
Added 6.3.4
Revised 6.4.2
Added 7.1.2-P.1
-P.3
Added 7.1.4-P.2
Date 2012.12.14
Status Index
Added 4.2.19
Added 5.1.10-P.2
Revised 7.1.2
© 2013 MIMAKI ENGINEERING CO.,LTD.
Manual Ver. 1.3 Remark
Rev.
1.3 Block diagram was changed.
1.2 "PBA600F-36-G (Old)" and "PLA600F-36-R (New)" were written jointly
1.2 List of Connectors was revised.
1.1 Procedure was revised.
1.1 This item was added as an old power supply.
1.2 This item was written as a new power supply.
1.1 Procedure was revised.
1.1 "PBA600F-36-G (Old)" and "PLA600F-36-R (New)" were written jointly
1.1 This item was added as an old power supply.
1.2 This item was written as a new power supply.
Manual Ver. 1.2 Remark
Rev.
1.2 Block diagram was changed.
1.1 Switching power supply is changed.
1.1 List was added
1.1 List was added
1.1 List was added
1.1 List was added
1.1 List was added
1.1 Power supply is changed.
1.1 Description in the outline was added, numerical value in the work flow was changed.
1.1 Numerical value was changed.
1.0 Added
1.0 Added
1.0 Added, following section number was the order forwarding.
1.2 Procedure was changed.
1.2 Procedure and figure was changed
1.1 Power supply is changed. (4.2.19 in old edition.)
1.1 Numerical value was changed.
1.2 Numerical value was changed.
1.0 Added, following section number was the order forwarding.
1.0 Added, following section number was the order forwarding.
1.0 Added
1.1 Power supply is changed.
1.2 Error message was added, cause and countermeasure was changed.
1.2 Item was added, cause and corrective measure was changed.
Manual Ver. 1.1 Remark
Rev.
1.0 Added
1.1 Added notes of the setscrew
1.1 Revised Error message.
Changes
Changes
Changes
Maintenance Manual Change Tracking P.1