Import And Export Files - Agilent Technologies NovoCyte Quanteon Operator's Manual

Running Samples

Import and Export Files

The .ncf data file includes all the acquired data, information about cytometer
settings and data analysis, etc. The data can also be exported as an FCS 3.0, FCS
3.1, or CSV file and be analyzed by a third-party software. There are two methods
to export a file.
To manually export a file, right-click the specimen or sample name in the
•
Experiment Manager and select Export > Export FCS File ... or Export > Export
CSV File ..., as shown in Figure 77. In the prompt window, specify the folder to
export the data.
Figure 77. Manually Export Data
The data can be automatically exported once the data acquisition is completed. To
do so, click Setting > Option > Experiment in the software main window. Select the
check box for Automatically export samples to FCS/CSV files after data
acquisition completed to enable this function (Figure 78). Once enabled, click
Export Setting to open the Export Events window. Export settings, including
generated file format (i.e. FCS 3.0, FCS3.1 or CSV), can be defined in this window
(Figure 79).
NovoCyte Quanteon Flow Cytometer Operator's Guide 103