Remote Operations - Keithley 2500 User Manual

• Differences: remote vs. local operation — Summarizes remote operation enhance-
ments and local-to-remote and remote-to-local transitions.
• Selecting an interface — Describes how to select between the GPIB and RS-232
interfaces.
• GPIB operation — Covers GPIB bus standards, bus connections, and primary address
selection.
• General bus commands — Describes general bus commands used for fundamental
GPIB control.
• Front panel GPIB operation — Summarizes GPIB error messages, status indicators,
and using the LOCAL key.
• Programming syntax — Describes the basic programming syntax for both common
and SCPI commands.
• RS-232 interface operation — Outlines use of the RS-232 interface to control the
Model 2500 via remote.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com

Remote Operations

13