Setting Parameters; Ied Identifiers; Application; Product Information - ABB RET670 Applications Manual

Section 3
IED application
3.4.5.2
Table 19: CHNGLCK Non group settings (basic)
Name Values (Range)
Operation LockHMI and Com
LockHMI,
EnableCom
EnableHMI,
LockCom
3.4.6
3.4.6.1
3.4.6.2
Table 20: TERMINALID Non group settings (basic)
Name Values (Range)
StationName 0 - 18
StationNumber 0 - 99999
ObjectName 0 - 18
ObjectNumber 0 - 99999
UnitName 0 - 18
UnitNumber 0 - 99999
3.4.7
3.4.7.1
84

Setting parameters

Unit Step
- -

IED identifiers

Application

IED identifiers (TERMINALID) function allows the user to identify the individual IED
in the system, not only in the substation, but in a whole region or a country.
Use only characters A-Z, a-z and 0-9 in station, object and unit names.
Setting parameters
Unit Step
- 1
- 1
- 1
- 1
- 1
- 1

Product information

Application
The Product identifiers function identifies the IED. The function has seven pre-set,
settings that are unchangeable but nevertheless very important:
Default Description
LockHMI and Com Operation mode of change lock
Default Description
Station name Station name
0 Station number
Object name Object name
0 Object number
Unit name Unit name
0 Unit number
1MRK504116-UUS C
Application manual