ABB RET670 Applications Manual page 82

Section 3
IED application
76
TimeSynch
When the source of the time synchronization is selected on the local HMI, the
parameter is called TimeSynch. The time synchronization source can also be set from
PCM600. The setting alternatives are:
FineSyncSource which can have the following values:
• Disabled
• SPA
• LON
• BIN (Binary Minute Pulse)
• GPS
• GPS+SPA
• GPS+LON
• GPS+BIN
• SNTP
• GPS+SNTP
• GPS+IRIG-B
• IRIG-B
• PPS
CoarseSyncSrc which can have the following values:
• Disabled
• SPA
• LON
• SNTP
• DNP
CoarseSyncSrc which can have the following values:
•
• SNTP
• DNP
• IEC60870-5-103
The function input to be used for minute-pulse synchronization is called TIME-
MINSYNC.
The system time can be set manually, either via the local HMI or via any of the
communication ports. The time synchronization fine tunes the clock (seconds and
milliseconds).
1MRK504116-UUS C
Application manual