Phase Selection, Quadrilateral Characteristic With Fixed Angle; Fdpspdis (21); Identification - ABB RET670 Applications Manual

1MRK504116-UUS C
Name Values (Range)
RLdFwd 1.00 - 3000.00
RldRev 1.00 - 3000.00
LdAngle 5 - 70
X1FwPP 0.50 - 3000.00
R1PP 0.10 - 1000.00
RFltFwdPP 0.50 - 3000.00
X1RvPP 0.50 - 3000.00
RFltRevPP 0.50 - 3000.00
X1FwPG 0.50 - 3000.00
R1PG 0.10 - 1000.00
X0FwPG 0.50 - 9000.00
R0PG 0.50 - 3000.00
RFltFwdPG 1.00 - 9000.00
X1RvPG 0.50 - 3000.00
X0RvPG 0.50 - 9000.00
RFltRevPG 1.00 - 9000.00
3.6.3
3.6.3.1
Application manual
Unit Step
ohm/p 0.01
ohm/p 0.01
Deg 1
ohm/p 0.01
ohm/p 0.01
ohm/l 0.01
ohm/p 0.01
ohm/l 0.01
ohm/p 0.01
ohm/p 0.01
ohm/p 0.01
ohm/p 0.01
ohm/l 0.01
ohm/p 0.01
ohm/p 0.01
ohm/l 0.01

Phase selection, quadrilateral characteristic with fixed angle

FDPSPDIS (21)

Identification

Function description
Phase selection with load
encroachment, quadrilateral
characteristic
Default Description
80.00 Forward resistive reach for the load
impedance area
80.00 Reverse resistive reach for the load
impedance area
30 Load angle determining the load impedance
area
40.00 Positive sequence reactance reach, Ph-Ph,
forward
7.00 Positive seq. resistance for characteristic
angle, Ph-Ph
30.00 Fault resistance reach, Ph-Ph, forward
40.00 Positive sequence reactance reach, Ph-Ph,
reverse
30.00 Fault resistance reach, Ph-Ph, reverse
40.00 Positive sequence reactance reach, Ph-G,
forward
7.00 Positive seq. resistance for characteristic
angle, Ph-G
120.00 Zero sequence reactance reach, Ph-G,
forward
20.00 Zero seq. resistance for zone characteristic
angle, Ph-G
100.00 Fault resistance reach, Ph-G, forward
40.00 Positive sequence reactance reach, Ph-G,
reverse
120.00 Zero sequence reactance reach, Ph-G,
reverse
100.00 Fault resistance reach, Ph-G, reverse
IEC 61850 IEC 60617
identification identification
FDPSPDIS
Z<phs
SYMBOL-DD V1 EN
Section 3
IED application
ANSI/IEEE C37.2
device number
21
251