Application; Setting Guidelines; Setting Parameters; Signal Matrix For Binary Inputs Smbi - ABB RET670 Applications Manual

Section 3
IED application
3.4.8.1
3.4.8.2
3.4.8.3
Table 21: PRIMVAL Non group settings (basic)
Name Values (Range)
Frequency 50.0 - 60.0
3.4.9
3.4.9.1
3.4.9.2
3.4.9.3
3.4.10
86

Application

The rated system frequency is set under Main menu/General settings/ Power system/
Primary Values in the local HMI and PCM600 parameter setting tree.

Setting guidelines

Set the system rated frequency. Refer to section
SMAI" for description on frequency tracking.

Setting parameters

Unit Step
Hz 10.0

Signal matrix for binary inputs SMBI

Application
The Signal matrix for binary inputs function SMBI is used within the Application
Configuration tool in direct relation with the Signal Matrix tool. SMBI represents the
way binary inputs are brought in for one IED configuration.

Setting guidelines

There are no setting parameters for the Signal matrix for binary inputs SMBI available
to the user in Parameter Setting tool. However, the user shall give a name to SMBI
instance and the SMBI inputs, directly in the Application Configuration tool. These
names will define SMBI function in the Signal Matrix tool. The user defined name for
the input or output signal will also appear on the respective output or input signal.

Setting parameters

The function does not have any parameters available in local HMI or PCM600.

Signal matrix for binary outputs SMBO

"Signal matrix for analog inputs
Default Description
50.0 Rated system frequency
1MRK504116-UUS C
Application manual