Fixed Signal Function Block Fxdsign - ABB RET670 Applications Manual

Section 3
IED application
Table 205: PULSETIMER Non group settings (basic)
Name Values (Range)
T 0.000 - 90000.000
Table 206: SRMEMORY Group settings (basic)
Name Values (Range)
Memory Disabled
Enabled
Table 207: RSMEMORY Group settings (basic)
Name Values (Range)
Memory Disabled
Enabled
Table 208: GATE Group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
Table 209: TIMERSET Group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
t 0.000 - 90000.000
3.14.4
3.14.4.1
744
Unit Step
s 0.001
Unit Step
- -
Unit Step
- -
Unit Step
- -
Unit Step
- -
s 0.001

Fixed signal function block FXDSIGN

Function description
Fixed signals
Application
The Fixed signals function (FXDSIGN) generates a number of pre-set (fixed) signals
that can be used in the configuration of an IED, either for forcing the unused inputs in
other function blocks to a certain level/value, or for creating certain logic.
Default Description
0.010 Time delay of function
Default Description
Enabled Operating mode of the memory function
Default Description
Enabled Operating mode of the memory function
Default Description
Disabled Operation Disabled/Enabled
Default Description
Disabled Operation Disabled/Enabled
0.000 Delay for settable timer n
IEC 61850 IEC 60617
identification identification
FXDSIGN -
1MRK504116-UUS C
ANSI/IEEE C37.2
device number
-
Application manual