Figure 202. Unmanaged Rule Configuration Window - Samsung WEC8500 Operation Manual

Wireless enterprise access point controller

Hide thumbs Also See for WEC8500:

Table of Contents

CHAPTER 8. Security

3) To check the configured information, use the 'show wids device rule unmanaged'

Configuration using Web UI

In the menu bar of <WEC Main window>, select <Configuration> and then select the

<Wireless Intrusion>  <Policy>  <User Defined Rule> menu in the sub-menus. And

then, select <Unmanaged> at the upper tab.

1) By using Add, Delete, or Change, operator can add, delete, or change user defined rules.

Figure 202. Unmanaged Rule Configuration Window

2) In the rule addition screen, operator can add a rule by entering the information and

click Apply.

Figure 203. Unmanaged Rule Addition Window

page 390 of 689