Samsung WEC8500 Operation Manual page 96

Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <Network>  <OSPF>  <Redistribute> menu in the sub-menus.
The OSPF Redistribute initial window is shown below.
Configuration using CLI
1) Connected configuration
The metric, metric-type, route-map, tag detail setting and default setting can be
configured.
WEC8500/configure/router/ospf 2# redistribute ?
connected
static
ospf
WEC8500/configure/router/ospf 2# redistribute connected ?
metric
metric-type
route-map
tag
OSPF
2) Metric configuration
WEC8500/configure/router/ospf 2# redistribute connected ?
metric
metric-type
route-map
tag
OSPF
<cr>
WEC8500/configure/router/ospf 2# redistribute connected metric ?
1 - 16777214
WEC8500/configure/router/ospf 2# redistribute connected metric 3 ?
<cr>
WEC8500/configure/router/ospf 2# redistribute connected metric 3
© SAMSUNG Electronics Co., Ltd.
CHAPTER 3. Data Network Function
Connected
Static routes
Open Shortest Path First (OSPF)
OSPF default metric
OSPF metric type for default routes
Route map reference
Set tag for routes redistributed into
OSPF default metric
OSPF metric type for default routes
Route map reference
Set tag for routes redistributed into
OSPF metric
page 96 of 689