Multicast Stream Admission Control - Samsung WEC8500 Operation Manual

7.12 Multicast Stream Admission Control

The multicast stream admission control is provided to protect the currently running
multicast streams from new streams that flow into the wireless LAN. When the maximum
allowed usage of streams or channels per radio is reached, the APC does not allow any
additional streams.
7.12.1 Configuring Admission Control
The multicast stream admission control function configures the maximum number of
streams or the maximum usage of channels to protect the currently running multicast
streams. It denies multicast streaming requests once the maximum number of streams or
the maximum usage of channels is reached. You can set the number of marginal streams or
the usage of channels with consideration for handover.
Configuration using CLI
To set multicast stream admission control, execute the following commands:
1) Configuration mode of CLI enter the multicast stream admission control mode of
the desired wireless section.
APC# configure terminal
APC/configure# [80211a/80211bg] msac
APC/configure/80211a/msac#
2) Enable or disable the multicast stream admission control function.

acm [MODE]
Parameter
Mode
3) Configure the maximum allowed number of streams.

max-streams [VALUE]
Parameter
VALUE
© SAMSUNG Electronics Co., Ltd.
Whether or not to use the multicast stream admission control
(enable/disable)
- enable: Enable
- disable: Disable
Maximum allowed number of streams
CHAPTER 7. WLAN Additional Services
Description
Description
page 362 of 689