Figure 130. Wlan-Based Acl Configuration - Samsung WEC8500 Operation Manual

3) Among retrieved ACLs, enter an ACL name to apply to the WLAN with the 'acl'
command.

acl [ACL-NAME]
4) To check the configured ACL, use the 'show wlan detail' command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<WLANs> menu in the sub-menus. Select a WLAN ID to change in the WLANs screen
and go to the <Advanced> tab.

ACL RULE: Configures the WLAN-based ACL function.

STATIC ADDRESS DISALLOWED

DHCP OVERRIDE

DHCP SERVER: Enter a DHCP server IP address.

WMM: Configures the WiFi Multimedia (WMM) mode.

DTIM: Enter a Delivery Traffic Indication Message (DTIM) value (1-255).

STATION IDLE TIMEOUT: Enter a station idle timeout value. The value range is 30-
3600 and it must be the multiple of 15.

VOIP FAILURE DETECT: Configures call failure detection.
© SAMSUNG Electronics Co., Ltd.

Figure 130. WLAN-based ACL configuration

CHAPTER 5. WLAN Management
page 237 of 689