Figure 53. Acl Interface Configuration Window (1) - Samsung WEC8500 Operation Manual

Parameter
DIRECTION
ACL_NAME
An example of entering a command that configures 'acl1' to the 'ge2' interface is
shown below.
APC# configure terminal
APC/configure# interface ge2
APC/configure/interface ge2#ip access-group fqm in acl1
3) To check the configuration information, use the 'show running-config network'
command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Security>  <Access Control Lists>  <Access Group (Interface)> menu in the sub-
menus.
The initial window of WLAN ACL configuration is shown below. When you click the
<Add> or <Delete> button, you can add or delete ACL rule.
To perform detail configuration, select an interface in the list.
© SAMSUNG Electronics Co., Ltd.
Application direction configuration (in/out)
ACL name to configure

Figure 53. ACL Interface Configuration Window (1)

Figure 54. ACL Interface Configuration Window (2)
CHAPTER 3. Data Network Function
Description
page 127 of 689