Os-Aware - Samsung WEC8500 Operation Manual

3.5.6

OS-AWARE

OS-AWARE is a function to use the option value of the DHCP Discover/Request
transmitted from a station to check the type of the operating system used by the station.
The procedures to set OS-AWARE and apply the OS-AWARE settings to ACL are
described below.
3.5.6.1 OS-AWARE Configuration
Configuration using CLI
1) Go to configure  os-aware mode of CLI.
APC# configure terminal
APC/configure# os-aware
APC/configure/os-aware # ?
delete
exit
os-aware
update
2) Set the OS-AWARE. Use the 'delete' parameter to delete the OS-AWARE.

os-aware [OS_AWARE NAME] dhcp-option [OPTION_NUM] dhcp-option
[OPTION_NUM] eq [VALUE] os-type [OS_TYPE NAME]

delete os-aware [OS_AWARE NAME]

update os-aware [OS_AWARE NAME] dhcp-option [OPTION_NUM] dhcp-option
[OPTION_NUM] eq [VALUE] os-type [OS_TYPE NAME]
Parameter
OS_AWARE NAME
SEQUENCE_NUM
OPTION_NUM
VALUE
OS_TYPE NAME
os-aware 'window7' creation:
APC# configure terminal
APC/configure# os-aware
APC/configure/os-aware # os-aware window7 seq 5 dhcp-option 1 eq AA
os-type windows
© SAMSUNG Electronics Co., Ltd.
Os-aware delete operation
Exit from os-aware mode
Os-aware add operation
Os-aware update
os-aware name to configure
Fingerprint pattern match sequence (1~255)
dhcp option value (1~255)
Fingerprint value (HEX)
os-type name to configure (Unknown, android, ios, windows, mac)
CHAPTER 3. Data Network Function
Description
page 135 of 689