Figure 207. Manual Remove Change Window In Ap Detail Screen - Samsung WEC8500 Operation Manual

2) If you change the setting of REMOVE MANUALLY to 'On' in the AP detail screen
and click Apply, the AP status is changed to 'Removed'.
8.2.2.5 Unauthorized AP detection option
Operator can enable or disable the AP detection option pre-defined in the system.
Configuration using CLI
1) Go to configure  wi  device  ap configuration mode.
WEC8500# configure terminal
WEC8500/configure# wi
WEC8500/configure/wi# device
WEC8500/configure/wi/device# ap
WEC8500/configure/wi/device/ap#
2) Using the following command, configure the unauthorized AP detection option.

[OPTION] [NOTI_TYPE]
Parameter
OPTION
NOTI_TYPE
© SAMSUNG Electronics Co., Ltd.

Figure 207. Manual Remove Change Window in AP Detail Screen

Unauthorized AP detection option
Event save option
- notify: Notify the state with alarm
- detect: Save the state with sys log
CHAPTER 8. Security
Description
page 394 of 689