Samsung WEC8500 Operation Manual page 380

2) Set the password type that will be used for the MAC authentication of the device.
WEC8500/configure/security/radius 1# mac-auth-pw-type [PW_TYPE]
Parameter
PW_TYPE
3) Set the type of separator of the device's MAC string which is used as a user ID when
the MAC authentication of the device is performed.
WEC8500/configure/security/radius 1# mac-auth-delimiter
[DELIMITER_TYPE]
Parameter
DELIMITER_TYPE
4) Configure whether to use lowercase characters or uppercase characters for the device's
MAC string that will be used as an ID upon the MAC authentication of the device.
WEC8500/configure/security/radius 1# mac-auth-case [CASE_TYPE]
Parameter
CASE_TYPE
5) Exit RADIUS server configuration and then security configuration mode.
WEC8500/configure/security/radius 1# exit
WEC8500/configure/security# exit
6) You can view configuration information by using the 'show security radius-server
detail <server-id>' command.
© SAMSUNG Electronics Co., Ltd.
Password type (default value: mac)
- mac: MAC address of the device. Note: it must be a string whose
type must be the same as that of the MAC string which is used as a
user ID when the MAC authentication of the device is performed
- shared-secret: Key shared between the APC and RADIUS server
Type of the MAC string separator (default: none)
- none: no separator (xxxxxxxxxxxx)
- colon: Uses ':' as a separator (xx:xx:xx:xx:xx:xx)
- hyphen: Uses '-' as a separator (xx-xx-xx-xx-xx-xx)
- single-hyphen: Uses only one '-' in the middle (xxxxxx-xxxxxx)
Case type of the device's MAC string (default value: lower)
- lower: Uses lowercase
- upper: Uses uppercase
CHAPTER 8. Security
Description
Description
Description
page 380 of 689