Figure 241. Ttacacs+ Server Configuration Window - Samsung WEC8500 Operation Manual

9) You can view configuration information by using the 'show security tacacs server
config' and 'show security tacacs server detail [SERVER ID]' commands.
Configuration using Web UI
In the menu bar of <WEC Main Window>, select <Configuration>, and then select
<Security>  <AAA>  <TACACS+> in the submenus.
If you click the <Add> button in the TACACS+ initial window, you can add a TACACS+
server.
The server addition window is shown below.
Item
INDEX (PRIORITY)
IP ADDRESS
SHARED SECRET
CONFIRM SHARED
SECRET
PORT NUMBER
RETRANSMIT
INTERVAL
RETRANSMIT COUNT
BEFORE FAILOVER
SOURCE IP ADDRESS
STATUS
© SAMSUNG Electronics Co., Ltd.

Figure 241. TTACACS+ Server Configuration Window

ID that distinguishes TACACS+ server configurations
IP address of the TACACS+ server
Public key of the TACACS+ server
Re-enters the key for TACACS+ server communications for
confirmation
Communication port number of the TACACS+ server
(range: 1-65,535, default value: 49)
Retransmission interval for a TACACS+ message
(range: 1-5, default value: 2, unit: seconds)
Maximum message retransmission count before a TACACS+ server
failover is attempted (range: 0-3, default value: 2)
Source IP address of the TACACS+ message
- Note: it must be one of the IP addresses configured in the W-EP
wireless LAN system.
Status indicating whether packets are transferred to the TACACS+
server (default value: enable)
CHAPTER 8. Security
Description
page 437 of 689