Samsung WEC8500 Operation Manual page 253

3) Configure the WPA type.
WEC8500/configure/wlan 1/security# wpa_type
Parameter
wpa_type
4) Configure the encryption type.
WEC8500/configure/wlan 1/security# [WPA_TYPE] [ENC_TYPE]
Parameter
WPA_TYPE
ENC_TYPE
5) Disable the PSK key management algorithm.
WEC8500/configure/wlan 1/security# no keymgmt psk
6) Configure the key management algorithm to 802.1x.
WEC8500/configure/wlan 1/security# keymgmt ieee8021x
7) Enable the 802.1x authentication.
WEC8500/configure/wlan 1/security# ieee8021x
8) After enabling the RADIUS server function for authentication, specify the index of
authentication RADIUS server. The RADIUS server information must be configured
in advance.
WEC8500/configure/wlan 1/security# radius-server auth-servers
[RADIUS_SERVER_ID_LIST]
© SAMSUNG Electronics Co., Ltd.
WPA type (wpa/wpa2): WPA Version 2 must be enabled at all times.
- wpa: WPA Version 1
- wpa2: WPA Version 2
WPA type (wpa/wpa2): Use the same value as the WPA type
configured before. WPA Version 2 must be enabled at all times.
- wpa: WPA Version 1
- wpa2: WPA Version 2
Encryption type (tkip/ ccmp)
- tkip: TKIP type. TKIP cannot be configured for WPA Version 2.
- ccmp: AES-CCMP type
CHAPTER 5. WLAN Management
Description
Description
page 253 of 689