Samsung WEC8500 Operation Manual page 224

4.2.8.2 Master AP Configuration (Optional)
The operator can configure the master AP for AP upgrade in the remote group.
If none is configured, a master AP is automatically selected.
Configuration using CLI
Example:
WEC8500# configure terminal
WEC8500/configure# ap-group rUpgrade
WEC8500/configure/ap-group rUpgrade# remote
WEC8500/configure/ap-group rUpgrade/remote# upgrade
WEC8500/configure/ap-group rUpgrade/remote/upgrade# select-masterAP
ap_1
WEC8500/configure/ap-group rUpgrade/remote/upgrade# delete-masterAP
[weafama/weafamb]
CLI for checking configuration:
WEC8500# show remote-ap-group upgrade config rUpgrade
================== Remote Ap Group Upgrade Config =================
Group Name
Enable
Type
Mode
Path
PortNum
MAXretries
ForceOption
weafama
weafamb
WEC8500# show remote-ap-group upgrade list rUpgrade
/* (RC/FR/RC)
AP_ID Model Version(config/current)
1 WEA303i
2 WEA312i
3 WEA303i
© SAMSUNG Electronics Co., Ltd.
: rUpgrade
: Enable
Default
: FTP
: package/ap
: 21
: 3
: Disable
: ap_1 (APID:1, IP:10.10.10.160)
: ()
: (APID:0, IP:0.0.0.0)
: ()
: RetryCount/FailReason/RebootCause
Global/1.7.0.U2
Global/1.7.0.U2
Global/1.7.0.U1
CHAPTER 4. AP Connection Management
Status(RC/FR/RC) MasterAp
None( 0/ 0/128) MasterApCfg
None( 0/ 0/146) -
None( 0/ 0/146) -
page 224 of 689