Samsung WEC8500 Operation Manual page 235

5) Specify the service MAC type.

mac-type [MAC_TYPE]
Parameter
MAC_TYPE
6) Select a radio bandwidth to provide the WLAN service.

radio [RADIO]
Parameter
RADIO
7) Select whether to provide the SSID as hidden. If it is set to 'hidden', the SSID is not
found when other devices do searching.

suppress-ssid
8) Select the tunnel mode.

tunnel-mode [TUNNEL_MODE]
Parameter
TUNNEL_MODE
9) Broadcast packets can be forwarded to the WLAN. The default value is disable.
WEC8500/configure/wlan 1# broadcast-enable
10) Multicast packets can be forwarded to the WLAN. The default value is disable.
WEC8500/configure/wlan 1# multicast-enable
11) Configure the 802.11k service for the WLAN. The default value is enable.

voice-enterprise-80211k [enable/disable] [CAPABILITIES]
© SAMSUNG Electronics Co., Ltd.
- localMac: An AP itself provides data service.
- splitMac: Provides data service through the APC.
- 1: 5 GHz
- 2: 2.4 GHz
- 3: Supports both 5/2.4 GHz
- LocalBridging: Make all the user traffics are bridged at the AP.
- 8023Tunnel: Make all the user traffics are transmitted in the 802.3 format
(Not supported if the MAC type is split mac).
CHAPTER 5. WLAN Management
Description
Description
Description
page 235 of 689