Chapter 9. Ip Application - Samsung WEC8500 Operation Manual

CHAPTER 9.
In this chapter, the IP application functions available in the APC and each configuration
method are described.
9.1 DNS
The DNS is a network service that interprets a domain or host name into an IP address.
The APC gets DNS information from a DNS server and provides the DNS relay function
that relays the DNS server and a client. If a wireless terminal connected to the APC
configures the APC as a DNS server, it can receive the DNS service.
If a DNS server is connected to the APC and a DNS proxy is configured, a station
connected to the APC can receive the DNS service by configuring the APC as a DNS server.
9.1.1 DNS Client Configuration
Configuration using CLI
1) Go to the configure mode of the CLI.
WEC8500# configure terminal
2) Configure a DNS client.

ip dns client enable: Enable

no ip dns client enable: Disable
3) Configure a DNS server to which DNS will be requested. You can enter maximum 3
DNS server addresses.

ip dns name-server [A.B.C.D]: Configures a DNS server.

no ip dns name-server [A.B.C.D]: Deletes a configured DNS server.

no ip dns name-server all: Deletes all the DNS servers.
© SAMSUNG Electronics Co., Ltd.
IP Application

CHAPTER 9. IP Application

page 457 of 689