Figure 119. Ap Upgrade-Individual - Samsung WEC8500 Operation Manual


SCOPE: Selects upgrade method. To make the AP working as the package
immediately after upgrade, select Quick Upgrade. To download the package to the
AP, select the Predownload menu.

TARGE AP: Select an AP target to upgrade. If you select <Keeping individual
setting>, an AP that is configured as individual is excluded from upgrade.

SELECT AP PACKAGE: Selects an AP package to upgrade.
3) If the SCOPE setup is Predownload upgrade, you must restart the AP once download is
completed. After selecting the <Administration>  <Reboot>  <AP> menu, select
Reboot All with Upgrade to restart the AP.
To upgrade a specific AP, follow the below procedure.
1) In the AP Upgrade window, click the <Individual> button.
2) The individual area is displayed on the window. After configuring each item, click the
<Apply> button.

SCOPE: Selects upgrade method. The <to individual> upgrades the selected AP to
a specific package and the <to global> makes a select AP working as global.
 FORCE UPGRADE: Enable or disable

SELECT AP PACKAGE: Selects an AP package to upgrade..
© SAMSUNG Electronics Co., Ltd.

Figure 119. AP upgrade-individual

CHAPTER 4. AP Connection Management
page 220 of 689