Video Cac Configuration - Samsung WEC8500 Operation Manual

7.3.3

Video CAC Configuration

To protect existing video calls, the video CAC function configures the maximum allowed
number of video calls and rejects any call request when the maximum number is exceeded.
You can configure the number of marginal calls for handover.
Configuration using CLI
For video CAC configuration, execute the command as follows:
1) Go to configure  video CAC mode of a wireless section of CLI.
APC# configure terminal
APC/configure# [80211a/80211bg] cac video
APC/configure/80211a/cac/video#
2) Enable or disable the video CAC function.

acm [MODE]
Parameter
Mode
3) Select a video CAC method.

method [method]
Parameter
method
4) Configure the maximum allowed number of calls.

max-calls [VALUE]
Parameter
VALUE
5) Configure the number of marginal calls with consideration for handover.

reserved-ho-calls [VALUE]
Parameter
VALUE
© SAMSUNG Electronics Co., Ltd.
Enables or disables the CAC function
- enable: Enable
- disable: Disable
Select a video CAC method (static/chan_util)
- static: Based on video calls
- chan_util: Based on channel usage
Maximum allowed number of video calls
Number of marginal calls with consideration for handover
CHAPTER 7. WLAN Additional Services
Description
Description
Description
Description
page 315 of 689