Figure 270. Snmp V3 User Configuration Window - Samsung WEC8500 Operation Manual

Wireless enterprise access point controller

Hide thumbs Also See for WEC8500:

Table of Contents

3) You can check created SNMP v3 User by using 'show snmp user' command.

Configuration using Web UI

In the menu bar of <WEC Main window>, select <Administrator> and then select the

<SNMP> <APC>  <v3 User> menu in the sub-menus.

Click <Add> button on the v3 User window, then created SNMP v3 User window is

displayed. Input configuration value and click <Apply> button, then it is applied.

- AES: Advanced Encryption Standard

Figure 270. SNMP v3 User configuration window

CHAPTER 10. System Management

page 472 of 689