[show bridge]
This command retrieves bridge information.
show bridge
[show interface switchport bridge]
This command retrieves the bridge information, i.e. the layer 2 protocol characteristic
information of the current VLAN, of a switch port.
show interface switchport bridge [BRIDGE_NAME]
Parameter
BRIDGE_NAME
[switchport]
This command configures a switch port, i.e. the layer 2 protocol characteristic information
of the current VLAN. The 'no' parameter is used for default configuration. Go to interface
mode and then execute the command.
switchport
no switchport
© SAMSUNG Electronics Co., Ltd.
CHAPTER 3. Data Network Function
Description
Bridge name
page 74 of 689