Configure Remote Acl Profile - Samsung WEC8500 Operation Manual

8.7.4

Configure Remote Acl Profile

The WLAN system can manage ACL to apply to a user if the AP of the remote group
operates as local bridge.
8.7.4.1 Configure Profile
The basic settings of the ACL profile are as follows:
Remote IP Acl which is used in Remote Acl Profile can not be deleted. So if you want to
delete Acl which is used in Remote Acl Group, you have to delete this Acl in Acl list of
Remote Acl Group.
Configuring by CLI
Example:
WEC8500# configure terminal
WEC8500/configure# rbac
WEC8500/configure/rbac# remote
WEC8500/configure/rbac/remote # acl-profile aclPro_1
WEC8500/configure/rbac/remote/acl-profile aclPro_1# add-acl acl1
WEC8500/configure/rbac/remote/acl-profile aclPro_1# add-acl acl2
WEC8500/configure/rbac/remote/acl-profile aclPro_1# exit
WEC8500/configure/rbac/remote # acl-profile aclPro_2
WEC8500/configure/rbac/remote/acl-profile aclPro_2# end
© SAMSUNG Electronics Co., Ltd.
Figure 254. Remote IP Acl Rule Edit Configuration
CHAPTER 8. Security
page 447 of 689