WEC8500/8050 Operation Manual
3) To check the configured information, use the 'show wids device rule unmanaged'
command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Wireless Intrusion> <Policy> <User Defined Rule> menu in the sub-menus. And
then, select <Unmanaged> at the upper tab.
1) By using Add, Delete, or Change, operator can add, delete, or change user defined rules.
2) In the rule addition screen, operator can add a rule by entering the information and
click Apply.
Samsung Electronics America
Figure 156. Unmanaged Rule Configuration Window
Figure 157. Unmanaged Rule Addition Window
Version 5.2
page 328 of 533