Figure 91. Ap Add/Remove Window For Ap Group - Samsung WEC8500 Operation Manual

Configuration using Web UI
In the menu bar of <WEC Main Window>, select <Configuration>, select <AP Groups>
in the submenu, and then select an AP group to configure. Under the 'APs' tab of the AP
group, APs can be added or removed.
4.2.1.3 Adding/Removing WLANs
To allows the same WLAN services to be provided to the APs allocated to each group, the
APC allows addition/removal of WLANs to/from each AP group.
Configuration using CLI
1) Go to the configure mode of the CLI.
WEC8500# configure terminal
WEC8500/configure#
2) Create an AP group or enter the AP group configuration mode.

ap-group [AP_GROUP_NAME]
3) Add/remove an WLAN to/from the AP group. Use 'no' parameter in front of the
command to delete an WLAN from the AP group.

add-wlan [WLAN_ID]

no add-wlan [WLAN_ID]
4) Use the 'show ap-group summary' command to check the AP group information.
© SAMSUNG Electronics Co., Ltd.

Figure 91. AP Add/Remove Window for AP Group

CHAPTER 4. AP Connection Management
page 176 of 689