Samsung WEC8500 Operation Manual page 395

The description of OPTION parameter is as follows:
Parameter
ap-blacklist-check
honeypot-with-unmanaged-station
honeypot
hidden-ssid
invalid-channel-fake-ap
Invalid-security
mac-spoofing
invalid-channel
adhoc-connection
managed-ap-valid-channel
unclassified
invalid-uic-fake-ap
user-defined-managed
3) To check the changed configuration, use the following command.

show wids device ap current-config
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Wireless Intrusion>  <Policy>  <Static Rule> menu in the sub-menus. And then,
operator can change the setting by selecting <AP> at the upper tab and clicking Apply.
In the configuration screen, operator can check Option and click Apply for configuration.
© SAMSUNG Electronics Co., Ltd.
Description
Allocates ID = 901 by checking an APincluded in the black
list.
Allocates ID = 902 by checking Honeypot and unmanaged
station is association status.
Allocates ID = 903 by checking the AP whose UIC is invalid
andthat use a managed SSID.
Allocates ID=904 by checking SSID is hidden
Allocates Rogue ID = 905 for an AP whose UIC is invalid and
its channel is not in the channel validation list among the Aps.
Allocates ID=906 for AP's security status is open.
Allocates Rogue ID = 907 for an AP that uses a SSID that is
not in the ssid-whitelist among the APs that use a managed
MAC and its UIC is valid.
Allocates Rogue ID = 908 by checking the association status
between an unauthorized AP and a managed client.
Allocates ID=911 for Adhoc
Allocates ID=912 by checking AP which is in the channel
validatation list.
Allocates Id=913 for not assigned AP
Allocate ID=914 for error detected unmanaged
Allocates ID=915 by checking User defined managed AP
CHAPTER 8. Security
page 395 of 689