Samsung WEC8500 Operation Manual page 533

7) Configure the alert boundary value of the disassoc. attempt count.

network-stats alert station alert-disassoc-try [VALUE]
Parameter
VALUE
APC/configure# network-stats alert station alert-disassoc-try 40
Disassoc Try Alert Threshold: 40
8) Configure the alert boundary value of the handover success rate.

network-stats alert station alert-handover-rate [VALUE]
Parameter
VALUE
APC/configure# network-stats alert station alert-handover-rate 50
Handover Rate Alert Threshold: 50 %
9) Configure the alert boundary value of the handover attempt count.

network-stats alert station alert-handover-try [VALUE]
Parameter
VALUE
APC/configure# network-stats alert station alert-handover-try 40
Handover Try Alert Threshold: 40
10) Configure the max entry value of the target in the station network statistics.

network-stats alert station alert-max-db [MODE]
Parameter
VALUE
APC/configure# network-stats alert station alert-max-db 5000
Max Alert DB Number : 5000
© SAMSUNG Electronics Co., Ltd.
CHAPTER 10. System Management
Description
2~1000 (default: 30)
Description
10-90 % (default: 50 %)
Description
10~1000 (default: 30)
Description
1000~50000 (default: 10000)
page 533 of 689