Samsung WEC8500 Operation Manual page 76

[bridge max-age]
This command configures the max-age of a bridge. The 'no' parameter is used for default
configuration.

bridge 1 max-age [MAXAGE]

no bridge 1 max-age
Parameter
MAXAGE
[bridge max-hops]
This command configures the maximum allowed number of hops of a Bridge Protocol Data
Unit (BPDU) bridge in the MST area.
The 'no' parameter is used for default configuration.

bridge 1 max-hops [HOP_COUNT]

no bridge 1 max-hops
Parameter
HOP_COUNT
[bridge multiple-spanning-tree enable]
This command configures a MSTP bridge. The 'no' parameter is used to clear the
configuration.

bridge 1 multiple-spanning-tree enable

no bridge 1 multiple-spanning-tree enable
[bridge rapid-spanning-tree enable]
This command configures a RSTP bridge. The 'no' parameter is used to clear the
configuration.

bridge 1 rapid-spanning-tree enable

no bridge 1 rapid-spanning-tree enable (bridge-forward)
[bridge spanning-tree enable]
This command configures a STP bridge. The 'no' parameter is used to clear the
configuration.

bridge 1 spanning-tree enable

no bridge 1 spanning-tree enable (bridge-forward)
© SAMSUNG Electronics Co., Ltd.
CHAPTER 3. Data Network Function
Description
Configures a maximum time (range: 6-40 s)
Description
Maximum allowed number of hops
page 76 of 689