Samsung WEC8500 Operation Manual page 324

WEC8500/configure/rrm/80211a/chdc# statsCollectEnable
Success: DBI set for DPC 11A Stats collect Enable : 1
5) If a coverage hole is estimated from the statistics for the pre-alarm function, a warning
can be transmitted. After entering into the chdc configuration mode, complete
configuration (statsWarningEnable). To disable the configuration, enter the 'no'
parameter.
WEC8500/configure/rrm/80211a/chdc# statsWarningEnable
Success: DBI set for DPC 11A Stats Warning Enable : 1
6) If a coverage hole is estimated from the statistics for the pre-alarm function, CHDC
can be executed. After entering into the chdc configuration mode, complete
configuration (statsActionEnable). To disable the configuration, enter the 'no'
parameter.
WEC8500/configure/rrm/80211a/chdc# statsActionEnable
Success: DBI set for DPC 11A Stats Action Enable : 1
7) Configure the minimum value of statistics Failed Client Count for the pre-alarm function.
It can be 1~75.
WEC8500/configure/rrm/80211a/chdc# min-failed-client-count 70
CHDC 802.11a : Set Minimum Failed Client Count Success
8) Configure the percentage of statistics Failed Client Count for the pre-alarm function.
It can be 10~35.
WEC8500/configure/rrm/80211a/chdc# percent-failed-client-count 20
Success: CHDC 802.11a : Set Percentage of Failed Client Count Success
9) Configure the threshold of RSSI that will be added to the statistics Failed Client Count
for the pre-alarm function. Configure it for Voice Frame and Data Frame. It can be
-90~-20 (dB).
WEC8500/configure/rrm/80211a/chdc# rssi-threshold data -75
Success: CHDC 802.11a : Set RSSI THRESHOLD(-75) Successful
WEC8500/configure/rrm/80211a/chdc# rssi-threshold voice -75
Success: CHDC 802.11a : Set RSSI THRESHOLD(-75) Successful
© SAMSUNG Electronics Co., Ltd.
CHAPTER 7. WLAN Additional Services
page 324 of 689