Samsung WEC8500 Operation Manual page 504

2) Configure upload ftp/sftp server..

target server_address directory id password servType [ftp | sftp] port [port_no]
Parameter
Server_address
Directory
Id
Password
servType
port
3) Configure upload cycle.

schedule cycle date weekday hour minute
Parameter
Cycle
Date
Weekday
Hour
minute
4) Enable or disable periodic upload function.

enable

no enable
[Initialize Configuration information]
To initialize the current configuration information to the factory default, execute the
command as follows: If the 'full-erase' parameter is not entered, only the configuration
information is initialized.
WEC8500# factory-reset (full-erase)
© SAMSUNG Electronics Co., Ltd.
Description
Upload server address (ipv4, ipv6)
Upload directory
ftp/sftp id
ftp/sftp password
Server type (ftp/sftp)
Server port number
Description
Upload cycl [monthly | weekly | daily]
Every upload date for if you select Monthly
Every weekday if you select Weekly
Upload time (hour)
Upload time (minute)
CHAPTER 10. System Management
page 504 of 689