Figure 140. Wpa/Wpa2 802.1X Configuration (1) - Samsung WEC8500 Operation Manual

Item
PROFILE NAME
AUTHENTIC
ATION
SERVER
ACCOUNTI
NG
SERVER
FALLBACK TEST
INTERVAL
ACCOUNTING INTERVAL
Select AUTHENTICATION SERVER and ACCOUNTING SERVER as Enable and
configure the rest items.
© SAMSUNG Electronics Co., Ltd.

Figure 140. WPA/WPA2 802.1x Configuration (1)

A WLAN configuration name is displayed.
Enable/ Whether the authentication function is enabled.
Disable - Enable: The authentication function is enabled.
- Disable: The authentication function is disabled.
RADIUS Authentication server that will be used as the first priority
SERVER 1 (Can select one out of pre-configured RADIUS servers.)
RADIUS Authentication server that will be used as the second priority
SERVER 2 (Can select one out of pre-configured RADIUS servers.)
RADIUS Authentication server that will be used as the third priority
SERVER 3 (Can select one out of pre-configured RADIUS servers.)
Enable/ Whether the accounting function is enabled.
Disable - Enable: The accounting function is enabled.
- Disable: The accounting function is disabled.
RADIUS Accounting server that will be used as the first priority
SERVER 1 (Can select one out of pre-configured RADIUS servers.)
RADIUS Accounting server that will be used as the second priority
SERVER 2 (Can select one out of pre-configured RADIUS servers.)
RADIUS Accounting server that will be used as the third priority
SERVER 3 (Can select one out of pre-configured RADIUS servers.)
RADIUS server Fallback attempt interval (unit: s, range: 0-500,
default: 0), When set to 0, the fallback function is disabled.
Accounting information transmission interval (unit: s, range: 0-
10000, default: 600), When set to 0, the periodic accounting
information transmission function is disabled.
CHAPTER 5. WLAN Management
Description
page 255 of 689