Samsung WEC8500 Operation Manual page 207


AP MODE: AP operational mode (General AP/Root AP/Repeater AP/Sniffer AP)

MAC ADDRESS: Cannot be changed to the MAC address of an AP.

MAP LOCATION

LOCATION: Information of location where an AP is installed

IP ADDRESS: IP address of AP

IP ADDRESS POLICY: IP address mode

DISCOVERY TYPE: AP discovery type

ADMIN STATUS: AP administrative status

OPER STATUS: Current AP operational status

PRIMARY CONTROLLER NAME, SECONDARY CONTROLLER NAME,
TERTIARY CONTROLLER NAME: Redundancy mode
For WEC8050, the TERTIARY CONTROLLER NAME is not supported.

IP SEC: set IPSec service related function.
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Access Points>  AP  <Advanced> menu in the sub-menus.
he setting options in the Advance tab are as follows. Fill in each item and click the
<Apply> button to apply the settings.
© SAMSUNG Electronics Co., Ltd.
CHAPTER 4. AP Connection Management
page 207 of 689