Retrieving Storage Media - Samsung WEC8500 Operation Manual

Wireless enterprise access point controller
Hide thumbs Also See for WEC8500:
Table of Contents

Advertisement

10.12.7 Retrieving Storage Media

The WEC8500 supports a disk and USB memory as a storage media. And the WEC8050
supports only a disk as a storage media. Both current directory-based relative path and
absolute path are all supported during command execution and the path of each device is
shown in the below table.
Device
Disk
USB memory
The check the information of a storage media connected to the APC, use the 'df' command.
WEC8500/file# df
Device
Filesystem
Total size
Device
Filesystem
Total size
Using the results of entering the above command, an operator can check the below
information.
The disk and USB memory are connected.
Disk free space: 11.3 GB
USB memory free space: 7 GB
© SAMSUNG Electronics Co., Ltd.
Path
disk:/
Uses the system disk as a storage media.
(basic path)
usb [N]:/
Uses a USB memory as a storage media.
('N' represents a partition number in a USB memory.)
: disk
: ext4
: 12.9G Free space: 11.3G
: usb1
: vfat
: 7.4G Free space:
CHAPTER 10. System Management
Description
7.0G
page 521 of 689

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wec8050

Table of Contents