Figure 98. Remote Ap Group Add/Remove Window - Samsung WEC8500 Operation Manual

3) Designate remote AP group properties to the AP group.

remote-group
4) When disabling the remote AP group attribute, use the 'no' parameter in front of the
remote-group

no remote-group[REMOTE_AP_GROUP_NAME]
Configuration using Web UI
In the menu bar of <WEC Main Window>, select <Configuration> and then select the
<AP Groups> menu in the sub-menus. Click the <Add> or <Delete> button to add or
delete a group.
If you creat AP Group by click <Add> button, this group is created for Remote AP Group
by checking Remote AP Group.
4.2.2.2 Local Authentication Configuration for Remote AP Group
Users (stations) accessing the remote AP and the Radius server which authenticates such
users can be configured.
Configuration using CLI
To configure the local authentication of the remote AP group, perform the command as
follows:
1) Go to configure Remote AP Group configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure#
© SAMSUNG Electronics Co., Ltd.

Figure 98. Remote AP Group Add/Remove Window

Figure 99. Define Remote AP Group
CHAPTER 4. AP Connection Management
page 192 of 689