Samsung WEC8500 Operation Manual page 375

Wireless enterprise access point controller

Hide thumbs Also See for WEC8500:

Table of Contents

7) To lead the station which performs load balancing to connect to a specific AP, set the

probe response limit time to other APs.

no-probe-timeout [NUMBER]

8) The rssi-high value is a criterion for excluding candidates for load balancing to be

selected. The station with the RSSI value higher than the set value does not attempt at

load balancing (In case of the active mode, N/A).

rssi-high [NUMBER]

9) The rssi-high value is a criterion for excluding candidates for load balancing to be

selected. The station with the RSSI value higher than the set value does not attempt at

load balancing (In case of the active mode, N/A).

rssi-low [NUMBER]

CHAPTER 7. WLAN Additional Services

Reconnection limit time (0~100 sec.)

Probe response limit time (0~100 sec.)

Probe response limit time (0~100 sec.)

RSSI reference value (-100~0 dbm)

page 375 of 689