8.7.4.2
Remote Ap Group config
You can configure Acl Profile to Remote Ap Group.
Configuring by CLI
Example:
WEC8500# configure terminal
WEC8500/configure# ap-group apg_1
WEC8500/configure/ap-group apg_1# remote
WEC8500/configure/ap-group apg_1/remote# acl-profile aclPro_1
WEC8500/configure/ap-group apg_1/remote# end
CLI for confirming configuration:
WEC8500# show rbac remote-group summary
GRP_ID
======
2
etc/rmtapgrp/rbac_cfg_rmtapgrp2_XXXX.tar
Configuring by Web UI
Configuration > AP Groups > Remote AP Group > ACL Profile
After changing ACL PROFILE NAME, click Apply.
Excute Send To Aps, Acl profile is transferred to AP, and related configurations are
transferred to AP.
Example:
© SAMSUNG Electronics Co., Ltd.
Figure 257. Remote Acl Profile Edit Configuration
GRP_NAME
==================
apg_1
PRO_ID Role Config File Name
====== ==========================
1
CHAPTER 8. Security
page 449 of 689